Hard anodized light weight 7076-T6 aluminum construction
Holes drilled for fat loss
Fits many Team Associated vehicles, and may also be used in other
automobiles requiring 48 pitch gears
Fits motors with 1/8″ diameter shaft
Laser etched tooth count
Two set screw holes
Factory Team 34T 48P Light weight aluminum Pinion Gear with Established Screw
Number of Teeth: 34
Gear Pitch: 48
Hole Diameter: 1/8″
jxs 01/28/16

Features and Benefits
Proven Design
Decades of machine apply on various applications
B pad mounting flange permits higher pressure applications
Improved Efficiency
Better bearing lubrication system uses inlet oil rather than high pressure oil, enhancing volumetric efficiency for even more power output
The highly polished shaft and gears improve mechanical efficiency and reduce wear on these components, increasing the service your life and reliability of the pump.
The optimized trapped oil relief areas lessen pressure ripple for quieter operation. This also reduces the input ability requirements.

Technical Information
Rotation: CCW or CW
Installation Flange: SAE B 2 Bolt
Maximum Continuous Pressure: 248 bar [3600 PSI]*
Maximum Intermittent Pressure: 276 bar [4000 PSI]**
Minimum Speed at Continuous Pressure: 750 RPM
Maximum Rotating Torque at 0 Pressure: 4 Nm [36 lb-in]
Maximum Continuous Inlet Pressure: 107°C [225°F]
Minimum Operating Temperature: -29°C [-20°F]
Maximum Inlet Vacuum by Operating Condition: 6.0 In. Hg

Ever-Power aluminum gear motors are the ideal decision for an array of applications from the tiny to the channel and large off-highway cars.