Why Coupling Grease?
Adequate lubrication is essential for satisfactory gear coupling operation. Gear Coupling Grease is especially developed for gear coupling applications to boost coupling existence although significantly cutting down maintenance time. Its higher viscosity base oil and tackifier combine to help keep the grease in place and protect against separation and it’s in full compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in colour and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to large centrifugal forces usually discovered in couplings. Bearing or general purpose greases have a tendency to separate and reduce effectiveness resulting from substantial centrifugal forces about the various substances at high rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from the thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate in the gear tooth mesh spot resulting in premature coupling failure. Gear Coupling Grease is developed to highly resistant to centrifugal separation in the oil and thickener, which enables the lubricant to be employed to get a fairly long time period of time.
Among the list of secrets and techniques on the results of Gear Coupling Grease will be the variable consistency through the entire working cycle of your application. The consistency of our gear coupling grease improvements using the operating circumstances. Working in the lubricant below real service ailments brings about the grease to develop into semi-fluid, functionally solash lubricating the dress in surfaces of the coupling. As the grease cools, it returns on the unique consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and five lb. cans.
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust protection
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location beneath higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?