The EP Greenhouse reducer is a concise and lightweight reduction gear motor with an integrated limit switch system that’s ideal for assembly of a locally available electric engine. The gear reducer is used in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP reducer is certainly rainproof and windproof. The gear reducer includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is locked when the decrease gearbox is not running. The completely sealed reduction reducer has an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all situations, even at high temperature ranges. Thanks to the use of an growth chamber, the gear motor can be installed in any placement. There are no restrictions, since there is no need for a bleed connect. The sealed reduction gear driver keeps the gear essential oil of the gear driver in optimum condition for its entire operating lifetime. The gearbox is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear reducer comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an built-in chamber and is enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and simple to adjust. The limit switch system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency 
of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).