Material Handling Power UNIT two
Standard Description
This power unit functions power up gravity down circuit. Activate the start out solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the reducing pace managed by the stress compensated movement management valve. Merchandise of this series is often extensively used in the sector of logistic devices such as fork lift, mini lift table, and so forth.
Specific Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned ahead of mounting the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil transforming is required immediately after the original a hundred operation hrs,afterwards when just about every 3000 hrs.
5. The electrical power unit ought to be mounted horizontally.

Material Handling Energy UNIT one
Standard Description
This power unit is developed for your fork lift field, consisting of hugely efficient gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down motion are managed from the lever of the guide release valve, and that is outfitted with an electric switch to activate the motor. The lowing velocity is managed through the stress compensated movement handle valve.
Distinctive Notes
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned before installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities, N46 hydraulic oil is advised .
4. Oil changing is needed soon after the initial one hundred operation hrs, afterwards the moment every single 3000 hrs.
five. The electrical power unit shown is designed to be mounted horizontally.