Highest wear resistance out there by sealing grease between pins and bushings
The sturdiness of chain is significantly enhanced because grease is sealed among the pins and bushings by O-rings. The O-ring chain may be the most dependable model with the Ultimate Daily life Chain Series with its exceptional put on resistance even within the problems or environments in which chain maintenance is hard.
Encouraged utilizes.
?Situations where regular chain replacement is needed due to put on stretch
?Circumstances exactly where lubrication during the service is unattainable
?In an surroundings with significantly soil, sand, dust, etc.
?Applications that demand power increased than that of a sintered bushing roller chain
Other options
?Cutting down noise. (The noise degree is 3 dB lower compared to conventional roller chains.)
?Cutting down vibration with the friction produced by O-Ring. (The power reduction due to the friction is almost negligible, because the frictional force in between the pins and bushings is for usually during the applications.)
Choice of chains
The power of an O-ring chain is nearly precisely the same as that of the normal roller chain. (Since the pins are longer than these of standard roller chain, the average rupture strength is somewhat reduced.)
For deciding on an appropriate chain, refer to “Selection of Chains” .
When the service ambient temperature is higher than 80° C, distinctive heat resistant O-rings have to be utilised. In this instance, make contact with us for far more information and facts.
Connecting links and offset hyperlinks
Two forms of connecting hyperlinks are available: clearance match and interference fit. When high power or durability is needed, use interference-fit connecting hyperlink. Only 2POJ is accessible since the offset hyperlink for all sizes.
Sprockets
O-ring chain makes use of longer pins than a common roller chain. When applying multiplex O-ring chain, the conventional sprocket for multiplex chains cannot be applied.
Caution
O-ring chain isn’t recommended in applications wherever solvents or other substances might assault “Nitric Rubber”. Exclusive material O-rings may also be accessible for these problems: Please seek advice from us for details. In general, “Nitric Rubber” is broken by contact with the following chemical components.