We are focused on research and creation of items that meet up with the increasingly superior electronics industry and are widely used in computers, home appliances, consumer electronics, communications, information, industry, medical and various other fields.
We also has patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s distinctive design.
Ever-Power provides products which are smaller sized, lighter, more ability efficient, and easier to use.
We selling products worldwide and obtain the certifications for each of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet up with the latest regulations.
Gear adapters install between the vehicle transmission and power take-away, and may serve several purposes. Mostly, adapters are utilized to improve the way of rotation of the PTO productivity shaft. They can even be employed to space the PTO out and from the transmission case. On some imported or non-SAE common transmissions they allow for the mounting of standard 6-bolt ability take-offs. Gear Adapters can be found to fit most popular transmissions.
Several body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Fits PTO rotation compared to that of the driven equipment
Standard and Pto Adapter china non-standard bolt patterns: Suits SAE common PTOs to non-standard transmissions
• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (produces 20 to 40 HP from the power remove)
• No need to modify power take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with engine, hydraulic hoses and flat faced couplers
• Ideal for three point electric power take off products – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches provide a safe means to protect operators and costly machinery from scenarios when the inertia of PTO driven implement exceeds and over-operates the tractor PTO velocity. In such a case, the over-running coupler will free-wheel
smoothly and properly. Over-running clutches will normally hold up against applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Severe shock loads or drive line angularity will certainly reduce this capability
If the space of your PTO does not fit properly within a tractor, a PTO adapter can extend the size and never have to replace it for a new one. This adapter has an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional duration on the end of your PTO. This tractor PTO shaft adapter features both a lady 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This allows more connection choices and is perfect for anyone that owns an older tractor since the older parts may well not be produced any longer and so are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to implement and free wheels efficiently when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Expected with 1000 RPM gearcase upgrade or Three Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It can be easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a terrific PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is ranked for tractors up to 70 HP.