Common Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate material dealing with gear. The lowering motion is achived through the solenoid valve with the decreasing velocity controlled by an adjustable needle valve. The left and ideal functions are outfitted which has a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek the advice of our income engineer for the various pump displacement, motor electrical power or tank capacity.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned before set up of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of impurities.N46 hydraulic oil is advised.
four. This electrical power unit should be mounted horizontal.
5. Check the oil level from the tank immediately after the very first begin of your power unit.
6. Oil modifying is required just after the original a hundred operation hrs, afterwards the moment every single 3000 hrs.