Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric engine, capacitor and quickness control change is still hooked up however the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “App Notice” below for utilize in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have got a pull-chain). If you order several motor at the same time, we will do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan program. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electric engine will overheat and enter automated thermal electric fan motor china overload if run in a nonfan program where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automated thermal overload. (Your companion blade from another producer may have a steeper blade position.)
Origin: This electric engine is produced in China.